Re: how to set up vmware channel between primary and secondary vCenter...
No, you don't have to configure LAG.If LAG is configured, then the portgroup's load balancing should be configured to Route based on IP hash, that's why I asked. You should not use a gateway for...
View ArticleRe: Recover Snapshoted VMDK file
Hey Man! That was great and it did the trick! Great!!! Really i don't want to bother you anymore but I've got some questions: 1 - what do think caused the problem in the first place? 2 - what did i do...
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
What I am trying to accomplish is to set up vCSHB in WAN environment:I have two ESXi hosts in two different subnets (172.x.x.x and 10.226.x.x). I have the primary and secondary (both are virtual...
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
So the VLAN10 is spanned across two data centres, right?Simply, can you ping 192.168.1.101 from 192.168.1.100? I meant that as long as the Primary can reach Secondary on Layer 2, it should work.
View ArticleBreak VDP on first run by filling it up
Hello - We're really trying to make VDP work, but this is our 3rd attempt and it still seems to lack some key (basic) management functionality. Here's the scenario: Create a backup jobBackup job...
View ArticleRe: Failing to navigate to plugin registration page after deploying vApp
Thanks Chris. Trying with SSL just results in an error about the packet being invalid/too large -- standard browser error message when you try to connect via SSL on a non-SSL enabled port. The error...
View ArticleRe: Failing to navigate to plugin registration page after deploying vApp
FYI adding a host record to the DNS server for the IP assigned to the management server didn't help. Full error is: HTTP Status 404 - /register-plugintype Status...
View Article[JIRA] (HHQ-5914) Reduce logging messages from
Edward Gonzales created HHQ-5914:- Summary: Reduce logging messages from Key: HHQ-5914 URL: https://jira.hyperic.com/browse/HHQ-5914 Project:...
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
The two esxi hosts are managed by the same vCenter server and the same vDC but they are in two different physical locations (i.e. two different physical data centers). Yes, VLAN 10 is spanned across...
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
Then it's quite strange, it should work. Have you configured VLAN10 on the dvSwitch port group?Right click on the portgroupClick Edit SettingsClick VLANEnsure VLAN 10 is assigned
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
In this case, if I use a non-private IP with default gateway and DNS (on both primary and secondary) for Channel network, that should work, right?That means, Channel IPs on primary and secondary are...
View ArticleMove VMs serially
Hi Community, How can I get all the VMs in a datastore and then storage vMotion them, one at a time, to a different datastore? Here's what I tried, but it kicked off 8 svMotions at once- not what I...
View ArticleClik here to view.
Re: how to set up vmware channel between primary and secondary vCenter...
> Have you configured VLAN10 on the dvSwitch port group?Right click on the portgroupClick Edit SettingsClick VLANEnsure VLAN 10 is assigned Yes, I have done that, but it does not work.
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
Not quite sure what the root cause is... The following is from the vCSHB documentation. Channel Network connection(s) configured with the following:Static IP address in a different subnet than the...
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
> VLAN10, is there a gateway?I don't think there is gateway for VLAN10. Do I need to config one for the vDS? If so, how?
View ArticleRe: Creating snapshots failing
Try to clone the virtual machine and make it as single vmdk disk and check if it works.
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
BTW, I've configured a multiple-NIC on both primary and secondary. Both vNICs (on both primary and secondary) for public IP/mgmt IP and Channel IP use the same dvUplink (i.e., physicalnetwork...
View ArticleRe: esxi and vcenter server
Ensure that your vcenter version should always be equivalent or the newer version when compared to the ESXi hosts which are managed by it (example :if esxi is 5.1 then you should have vcenter 5.1 GA...
View ArticleRe: RAM usage after upgrading to ESXi 5.1 U1
Is that consistent ? check the host memory usage on all the virtual machines and check if that is at par with the host. May be your virtual machines uses more memory which might have caused that.
View ArticleClik here to view.
A general system error occured: Migration failed while copying data. Already...
A couple of issues. When I vmotion a vm from one host to another, validation suceeds but after 14% it gives this error Also, I changed DRS automation level to manual but when i try to power on a vm,...
View Article